"VCR" SERIES VIDEOMICROSCOPES
(Video Check Roll)

The VCR-P is a miniaturized video device amongst the most appreciated and exclusive in nowadays' market; it's able to examine and check over flat and curved surfaces of any material and disposes of a wide choice of objectives comprised between 25X and 2350X (each one with magnetic mount). Supplied with 320X objective.

It's equipped of a stand with a high precision stage X-Y with microshiftings up to 10 mm on both axis which allows to view with impeccable sharpness the flowing of the images also at high magnifications.

The built-in cold light lighting system is of the annular professional kind at high luminous intensity and variable at continuous scale.

The chance to vary the source angle of the beam light in 14 different positions, allows to highlight very well also the smallest asperities and conformations of the surfaces under examination.

Very appreciated in the graphic field where is very useful for the examination and check of the holograms' printings.

It's provided with Video View Basic software and it's ready to be connected to Desktop or Laptop through its 5Mpx CMOS USB 2.0 (or USB 3.0) camera.

It's a video device for micrography; thanks to the coaxial light lighting system equipped, it's very good to be employed in the examination and checking of metallic surfaces to find cracks and imperfections.

It's equipped with a mechanical stage X-Y for microshiftings up to 10 mm and uses objectives of the VCR series from 200X to 2350X. Supplied with 475X objective.

Its 5Mpx CMOS USB 2.0 (or USB 3.0) camera allows the connection to Desktop or Laptop, while the Video View Basic software manages the vision, acquisition, comparison, archive, measuring of images and film segments.

The VCR-CX is very appreciated also in the graphic sector to examine printing cylinders, and in particular the anilox ones.

It's an optimum video control system which allows to examine and measure flat and curved surface in X-Y-Z axis with high precision.

Through the help of a microshiftings' pilot mechanism and of the software which manages the precise focusing, the measurements in Z axis have an accuracy of 0.01 mm with a 750X objective.

The lighting in outfit is coaxial and it is possible to use objectives of the VCR series from 200X to 2350X thanks to the X-Y mechanical stage with which the VCR-ZL CX is equipped.

The software in outfit Video View Basic makes every common measurement; besides the possibility to make film segments, it is possible to compare and store the images captured with relative measurements and comments.

It's equipped with 475X and 750X objectives and and it's ready to be connected to Desktop or Laptop through its 5Mpx CMOS USB 2.0 (or USB 3.0) camera.

Completely motorized, with manual, half-automatic and automatic focusing, the VCR-Z CX has a control system which allows microshiftings at 1 µm steps.

The coaxial lighting allows to use objectives of the VCR series from 200X to 2350X and comprises a X-Y mechanical stage with microshiftings of 10x10mm.

The VCR-Z CX's coaxial lighting system is suggested for the check and measurement of flat and curved metallic surfaces on X-Y-Z axis and in particular for the measurement of cracks or the depth of engravings on cylinders in the graphic field.

It's equipped with 320X-750X-1500X objectives and ready to be connected to a Desktop or Laptop through its 1.3Mpx CMOS USB 2.0 camera (or 5Mpx CMOS USB 3.0), while the Video View software allows the vision, measurement, comparison and archive of the images, besides the focusing system management.